Skip to product information
Boilermaking Trainee Guide, Level 4 (Contren Learning)
  • Boilermaking Trainee Guide, Level 4 (Contren Learning)
  • Boilermaking Trainee Guide, Level 4 (Contren Learning)
Boilermaking Trainee Guide, Level 4 (Contren Learning)

Boilermaking Trainee Guide, Level 4 (Contren Learning)

$178.52
Compare Amazon Prices

Brand: PEARSON EDUCATION

Author: NCCER

Edition: 2

Features:

  • (Total Level Hours: 165)
  • Advanced mechanical Trade math (15 Hours)
  • Trainee $19 ISBN 978-0-13-292236-4
  • Instructor $19 ISBN 978-0-13-292246-3
  • Covers tables of equivalents and units of conversion. Explains the basics of trigonometry and to apply it to the installation of
  • pipe. Explains how to calculate the weight of objects. (Module ID 34401-12)
  • Advanced Rigging
  • Trainee $19 ISBN 978-0-13-292237-1
  • Instructor $19 ISBN 978-0-13-292247-0
  • Explains how to determine the center of gravity for objects to be rigged and how a load’s weight and center of gravity affects
  • lifting devices such as cranes. Describes how to use cribbing to support lifted loads. Covers the use of slings and spreader or
  • equalizer bars to lift loads. Describes the tools used to move loads laterally. Explains how to determine the center of gravity
  • of asymmetrical loads. (Module ID 34410-12)
  • Advanced Boilermaking Construction Drawings
  • Trainee $19 ISBN 978-0-13-292238-8
  • Instructor $19 ISBN 978-0-13-292248-7
  • Covers symbols and abbreviations used on piping and instrumentation drawings (P&IDs) and piping arrangement
  • drawings. Explains how to read and interpret different types of construction drawings. Explains how to sketch an isometric
  • drawing from a plan view drawing, and how to calculate line lengths from isometric drawings. (Module ID 34402-12)
  • Advanced Pipe fabrication
  • Trainee $19 ISBN 978-0-13-292239-5
  • Instructor $19 ISBN 978-0-13-292249-4
  • Describes how to lay out and fabricate mitered bends, laterals, wyes, and ninety-degree intersections using tables of ordinates
  • or a calculator. This knowledge is required in order to fabricate specialty bends and intersections. (Module ID 08402-07)
  • Stress Relieving
  • Trainee $19 ISBN 978-0-13-292240-1
  • Instructor $19 ISBN 978-0-13-292251-7
  • Covers metal distortion and ways to prevent it. Explains thermal growth in metals, and how to calculate thermal growth
  • in given metals. Explains how misalignment creates stress in metals. Describes ways to relieve stress in piping that is
  • experiencing distortion due to welding, thermal growth, or misalignment. (Module ID 34406-12)
  • Quality Assurance
  • Trainee $19 ISBN 978-0-13-292241-8
  • Instructor $19 ISBN 978-0-13-292252-4
  • Covers codes governing welding and boilers. Describes weld imperfections and their causes. Identifies and explains different
  • nondestructive and destructive testing methods. Explains how to make visual inspections of fillet welds. Describes welder
  • qualification testing, and stresses the importance of quality workmanship. (Module ID 34407-12)
  • Advanced Exchangers
  • Trainee $19 ISBN 978-0-13-292242-5
  • Instructor $19 ISBN 978-0-13-292253-1
  • Identifies different types of heat exchangers and their components. Describes methods used to test exchangers, and
  • how to pull exchanger bundles. Explains how to replace a flange and a nozzle on an exchanger. (Module ID 34411-12)
  • Advanced Towers
  • Trainee $19 ISBN 978-0-13-292244-9
  • Instructor $19 ISBN 978-0-13-292254-8
  • Identifies different types of towers and their components. Explains how to remove and replace different types of packing
  • used in towers. Describes methods used to make field repairs to tower trays. Explains how to remove a tower distributer for
  • maintenance. (Module ID 34412-12)
  • Fundamentals of Crew Leadership
  • Trainee $40 ISBN 978-0-13-292245-6
  • Instructor $40 ISBN 978-0-13-292255-5
  • Describes leadership skills and styles, communication, delegating, and problem solving. Job-site safety and the crew
  • leader’s role are also discussed. Describes project planning, scheduling, and estimating. (Module ID 46101-11)

Number Of Pages: 500

EAN: 9780132921411

Release Date: 24-07-2012

Languages: English

Binding: paperback

Package Dimensions: 10.7 x 8.3 x 1.2 inches

Details: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Advanced Mechanical Trade Math, Advanced Rigging, Advanced Boilermaking Construction Drawings, Advanced Pipe Fabrication, Stress Relieving, Quality Assurance, Advanced Exchangers, Advanced Towers, and Fundamentals of Crew Leadership.

Instructor Supplements
Instructors: Product supplements may be ordered directly through OASIS at http://oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http://nccer.pearsonconstructionbooks.com/store/sales.aspx.
· Annotated Instructor's Guide (AIG) Paperback (Includes access code for Instructor Resource Center) 978-0-13-292169-5
· TestGen Software and Test Questions - Available for download from www.nccerirc.com. Access code comes in AIG and also available separately.
· Additional TestGen Software Access Code Cards978-0-13-213789-8
· PowerPoint® Presentation Slides 978-0-13-292170-1

You may also like